Dongguan Chuoxinghua Plastic Raw Material Co., Ltd. explained in detail the knowledge and details of SaaoWD supplied applied appliances for appliances. Can I use the same dose of flame retardants under different application conditions? This will appear in many cases. Today, PP halogen-free flame retardant manufacturers will introduce you. Flame retardant flame retardants include the main components of bromine and chlorine flame retardant paper are cellulose, hemicellulose and lignin. The method of flame retardant paper is to hinder the thermal decomposition of cellulose and the production of combustible gases, thereby achieving the purpose of firefighter, which can be used as a diluent gas. Flame retardants are functional additives that can bring flame retardancy to flammable polymer materials. There are many kinds of flame retardants, which can be divided into add flame retardants and reactive flame retardants. Among them, the addition of a flame retardant is added to the main polymer material by physical blending, and the polymer has flame retardant, mainly including halogen flame retardant (bromine or chlorine organic compound) and an inorganic flame retardant.Tetraphenyl m-phenylene bis(phosphate) factory Resorcinol bis(diphenyl phosphate) supplier  The reaction flame retardant is involved in the polymerization reaction, or as a auxiliary agent is involved in the polymerization, and finally introduces the flame retardant functional group in the polymer material, thereby increasing the flame retardancy of the polymer itself, effectively preventing the polymer material from being ignited, suppressing combustion spread. At present, the addition of flame retardants have dominant, widely used, accounting for 85% of flame retardants. The chlorine ablative agent is the same as the bromine flame retardant, but since the bromine flame retardant element is high, the bond can be smaller than-key energy, the free radicals are strong, and the bromine flame retardant is better than chlorine-resistant. Place the test piece vertically in the environment. When the flame-retardant polymer composite is used in a high humidity environment, some water-resistant flame retardants are easily dissolved or migrated to the surface of the composite material, resulting in a decrease in the flame retardancy and mechanical properties of the composite. For example, common applications have hidden dangers in this regard. At this time, it will greatly improve the water resistance of the application surface. Mainly used chemical, ie flame retardants treated wood. The mechanism of the flame retardant is to form a protective layer, isolation or dilute oxygen supply; or high temperature decomposition, release a large amount of non-combustion gas or water vapor, dilute the flammable gas released when the wood is thermally explained; or block the temperature of the wood temperature, It is difficult to reach the temperature required for pyrolysis; or increase charcoal formation ability, reduce heat transfer speed; or cut off the burning chain and quickly extinguish the fire. Good flame retardant safety, effective, lasting, economy. There are several chemical methods, which are often used in the currently used flame retardants. With the increase in high alum cement, the bond strength of the fire paint increases, and the fire resistance is lowered.Resorcinol Tetraphenyl Diphosphate manufacturer  This is due to the increase in the content of the unit area coating, the content of fire filler, flame retardant, etc., the substrate is more tight, and the coating is more tight, and the coating strength is improved, and the bond strength is improved. On the other hand, the other, and the resistance The combustion agent, the relative decrease in firefill makes the coating refractory performance. The expansion flame retardant is a new type of composite flame retardant that has been widely concerned in the industry in recent years. It has a unique flame retardant mechanism and halogen-free, low smoke and low toxic characteristics. The flame retardant system is mainly synergistic to the surface of the acid source, the carbon source, and the gas source triple, forming a dense porous foam layer on the surface of the material, not only prevent further degradation of the inner polymer and the release of the combustible object to the surface, but also prevent The heat source passes and isolates the oxygen source to the polymer, thereby preventing the spread and propagation of the flame. With the advancement of science and technology, polymeric materials, especially synthetic polymers, such as plastics and rubber, become more important in people's lives. However, most polymeric materials are flammable. In order to ensure that it is sold in many industries, PC flame retardant parent-based particles are sold, and we need to make flame retardant modification. In general, we will add flame retardants or flame-fired parent plasma in the material. Guangzhou PA6 halogen-halogen-free flame retardant manufacturer address is often used with ** halide due to its alone, and it works together. Plastic products are everywhere in our lives, and plastic products are widely used in people's lives.

News you might interested in