I have an irregular thing.Fatty alcohol polyoxyethylene ether sodium sulfate manufacturer  Until the foam rupture. Therefore, in the use of antifoaming agents, many printing and dyeing enterprises destroy the orientation molecules of the gas-liquid surface (interface) during operation due to the amount and performance of the defoamer. The surface of the fabric has an irregular shape oil. That is to say, what color oil) is very bright in the surface of the fabric, so oil (what color is not very color from where the oil is from the oil. Therefore, while eliminating the bubble, it also brings it. Many unfavorable factors and negative impacts, even have economic losses. Touch it with hand, then enter the fabric. The foam continues to be thin, and soaked with silicone oil and other organic molecules in the surfactant. Foam ether foaming agent is Using alcohol removed, combined with sulfur. The particulate colorant mainly has two preparation methods. The first method is the same as that of other powder complexing agent, first soaking the powder colorant, then melting the extruded granulation with wax melt or resin; the second method is to soak the colorant with a surfactant, then The colorant particles are refined by mechanical force, form a concentration dispersion, and then mixed with latex, drying the grains after drying. The surfactant is mostly anionic and nonionic, such as fatty acids, sulfonate, etc., which typically use natural latex. The optimum washing temperature of the nonionic surfactant is less than 60 ° C, which exceeds this temperature affects the decontamination effect; the optimum washing temperature containing the cationic surfactant is above 60 ° C, lower than this temperature affects the decontamination effect. Amino acid surfactants and soap groups are also an anionic surfactant, mainly consisting of fatty acid + amino acid + base, such as coconut oleanlatin, sodium coconut oil, coconut oil TEA salt, lauryllate ammonia Sodium sodium If the cleansing oil is mainly vegetable oil, Huo Hakoba oil, slender, etc. Weak. The lower surface tension is low, the more valuable use of fluorocarbon surfactants. Because the surface of the wood is very low. In aqueous wood coating system, the choice of fluorocarbon surfactants is almost essential. In the market, there are many companies that produce water-based wood coatings in China. I believe we will use fluorocarbon surfactants. The most important ingredient of facial cleanser is a surfactant. According to the main components of the surfactant, the washing milk can be roughly divided into three categories: soap-based surfactants, sulfate surfactants, and amino acid surfactants. This shampoo belongs to the earliest shampoo type, shampoo and conditioner are used together. The principle of shampoo is to use the anionic surfactant in shampoo to produce a foam, separating the dirty east of the scalp and the hair and clean it. However, after shampoo, the hair expansion, the hair scales are slightly opened, the hair will be jealous, lack of gloss. The effect of conditioner is to use the cationic surfactant and the residual anionic surfactant so that the hair is soft, helping the hair scales to return to normal, and wrap a film in the hair surface, increase the smoothness of the hair and gloss. In an aqueous coating, aqueous latex coating, in an aqueous ink, in order to reduce the tension of the water and brush surface, a large amount of surfactant, such as dispersibility, wetting agent, and a flat agent, etc.Sodium Laureth Sulfate supplier , due to their existence, it will result in a large number of The bubble does not rupture for a long time. At this time, the antifoaming agent should be added to eliminate and suppress the generation of the foam. If the silicone antifoactor is used, since the surface tension of the silicon diffuser is very low, it is easy to cause the product shrinkage, the edge shrinkage, flowering, will leave the silicon spot, so the silicon diffuser cannot be used in these industries. Mineral oil, alcohol, polyether fragment agent is generally used.Sodium lauryl ether sulfate factory  Although their defoaming ability is not as strong as silicon foamers, they are more suitable for these industries than silicon foaming agents. Skin cleaning not only refers to dust, excess grease and sweat in the surface of the skin, but also to achieve no irritation, moisturizing skin protection effect. Therefore, it is especially important to choose a good cleaner. Most of the main components of the synthetic cleaners are synthetic surfactants, indicating that the active agent is the main active ingredient of the cleaning product. A cleaning product containing a flexible surfactant helps to reduce the damage of the skin barrier.

News you might interested in