Stabilizer, Add .2,2-benzene-1,4-diylbis(4H-3,1-benzoxazin-4-one) factory .. Impulse glue road surface special Irrill / road irrigation agent consisting of matrix asphalt, polymer polymer, modified rock asphalt, anti-car withdrawner, stabilizer, added ... potting The glue road surface special irrigation agent / road irrigation agent is made of matrix asphalt matrix asphalt. Anti-car withdrawal agent modified rock asphalt polymer polymer polymer polymer. Pulling glue road surface special irrigation agent / road irrigation agent is made of matrix asphalt modified rock asphalt, anti-car toilet, stabilizer.UV-3638 supplier  Commonly used plastic additives are: inorganic additives: fillers, enhancers, flame retardants, colorants, and nucleating agents. Organic additives mainly include: plasticizers, organic tin stabilizers, antioxidants, and organic flame retardants, degradation additives, and the like. Plastic blend modified plastic blending modification refers to a modified method of mixing other resins (including plastics and rubber) with resin to change the protracted resin properties. In recent years, with plastics (structures: synthetic resins, plasticizers, stabilizers, pigmentation) industrial production, plastics (structures: synthetic resins, plasticizers, stabilizers, pigment) packaging have been widely used. Waterproof geotextile, but due to plastics (structures: synthetic resins, plasticizers, stabilizers, pigment) packaging damage, non-woven tender fabric, white rubbish, green ecological condition is not optimistic. Therefore, in plastic (structures: synthetic resins, plasticizers, stabilizers, pigment) packaging products, plastics (structures: synthetic resins, plasticizers, stabilizers, pigments) damage Private collection, composite geomembrane has become the primary task. HDPE anti-seepage film: High density polyethylene geomembrane is an anti-seepage anti-corrosion material, which is widely used in various projects of various anti-seepage and anti-corrosion requirements. High-quality high-density polyethylene native resin, main component is high-density polyethylene, about carbon black, micro antioxidant and heat stabilizer, anti-aging material, ultraviolet absorber, no additional additives, fillers, and expansion agents, three-layer total Squeeze technology. The resin used is a native polyethylene resin designed for the application of a flexible anti-diaphragm. . Choice of composite geomembranes. Additives used in color coats are a small amount of additive added to increase coating properties. The additive is very small in the coating, but the effect is remarkable. If some can improve the performance of the coating and coating film, some can improve the drying time, and some can prevent the morphology of the coating. There are a wide variety of additives, including desiccants, curing agents, prosthesis, defoamers, matting agents, stabilizers, and the like. The soft polyvinyl chloride plastic is a product that is added to a plasticizer, a stabilizer, or the like, thermally kneaded, plasticized, and extruded in a polyvinyl chloride resin. Although a considerable amount of plasticizer is added, the acid, alkali, and salt properties are still good, and the corrosion-resistant material of hard polyethylene chloride can be referred to as the material of the chemical equipment lining. The lining method of the soft polyvinyl chloride plastic plate mainly includes bolt fixation and bonding. The substrate of the lining is usually made of carbon steel. Mainly used to produce intermediates, volume and chemicals of acetate. It can also be used as a solvent such as psegu paint, natural synthetic resin, and can also be used in leather colorants, emulsion stabilizers, paint diluents, delatable agents, and textile stains. Plastic flooring (also known as polyvinyl chloride floor) refers to a floor made of a polyvinyl chloride material. Specifically with polyvinyl chloride and its copolymer resin as the main raw material, a filler, a plasticizer, a stabilizer, a colorant, and the like are added, and the coating process or crimping or extrusion process is produced. In order to prevent or delay the aging of FRP products, extend the service life of the product, there is usually two ways: one is painted on the surface of the product, so that the surface has a layer of protective layer, can resist light, oxygen, wind, rain erosion, thus Extend the life of the product; the second is to add stabilizers (ultraviolet absorber, antioxidants, etc.) in the matrix resin (ultraviolet absorber, etc.Ultraviolet Absorber UV-3638 manufacturer ) require stabilizers. Most of the stabilizers for fiberglass steel are traditional organic stabilizers. FRP products Welcome weather and abrasion resistance, low hardness, wide application range. Some special applications, such as housing container cover panels, high requirements for their surface quality. Chapter 7 Key Analysis of Ice Cream Stabilizer Upstream Market, Upstream Market Analysis of Main Raw Materials Supply Status and Main Suppliers, Downstream Markets Mainly Analyze Ice Cream Stabilizers Mainly used in the fields, consumption (tons), and future growth potential.

News you might interested in