In terms of equipment, the company is equipped with an international leading surfactant production equipment and testing device, ensuring high quality and stability of the product by automatic control technology and product allocation technology of the production process. At present, the company's development of the amino acid surface active agent has been put into mass production, and is carried out in the development of green surfactants such as sodium coconutyltumulcate, lauryl / coconutyl cyculide. The continuous improvement of the performance of the original product, the continuous development of new green surfactant products and the original surfactant derivatives is an important point of consolidation and enhance the leading position in the company. The detergent contains an anionic, cationic surfactant, which can remove the oily protective layer of the skin, and then corrode the skin. In general, the stronger the detergent and digestive agent, the stronger the alkalin. Alkaline skin is stronger than that of acidic skin, and it is easy to use to contact the skin. Zhuhai brand factory in the cutting process can reduce the front chip, the friction of the surface and the surface of the machining, form a partial lubricant, thereby reducing cutting force, friction and power consumption, reducing the surface temperature and wear of the workpiece blank friction site, improve Cutting process of workpiece materials. The cleaning liquid consisting of an organic solvent is referred to as a solvent-based metal cleaning agent. The cleaning principle is to dissolve the oil of the metal surface using an organic solvent. The advantage of solvent-based cleaning agent is that the ability to remove oil is strong, and the disadvantage is to remove the ability of water soluble dirt. Commonly used solutions are to add a small amount of surface cleaning agent because the surfactant has excellent performance and function such as emulsification, dispersion, wetting, bubble, thereby improving the removal ability.Dodecyldimethylbenzylammonium chloride supplier  Jinan tubing cleaning agent brand.Alkyl Dimethyl Benzyl Ammonium Chloride factory  The bubble problem cannot be completely eliminated. The main ingredient of the foam cleaning agent is various surfactants. The active agent itself is an easily foamable substance, so we do not need to care about the presence of the foam, as long as the foam is controlled within a certain range, it will not affect normal cleaning and final cleaning results. Surfactants are widely used in various production sections of drilling, oil production, oil-like oil and other oil industries. Surfactants are also widely used as an additive of petroleum products such as fuel oil and lubricating oil to improve their various properties.C8-C16 Alkyldimethylbenzylammonium chloride manufacturer  Therefore, the professional silica gel liquid defoamer, the surfactant is exposed to the air bubble film in the air differs from the bubble film in the solution, which comprises two layers of surfactant molecules, forms a bimolecular film, adsorbed surfactant to a liquid film Have protective effect. The antifoaming agent is destroyed and inhibited. Wash your face with a towel, towel to maximize the skin, absorb the surfactant in cleansing products to prevent various surfactants from attaching in the skin surface, better cleaning the skin. However, there are some shortcomings with water with towels. It is often criticized to have: 1. Towels are easily infected by bacterial infection; 2. Towels are rough, rubbing and scratching the skin. The measurement of the quaternary ammonium salt surfactant content in the quaternary ammonium salt disinfectant typically used two-phase titration, and the mixture of sodium sulfate was titrant, and the mixture acidic indicator was an indicator. In the water-trichloromethane system, the cationic surfactant in the sample initially reacts with an anion dye, dissolved in a trichloromethane layer, blue; with titration, anionic surfactant substitution anion dye, at the end of titration The cationic dye produces a salt to make the trichloromethane layer light gray-pink. Further, the titrant is adjusted to a standard solution of tetraenzoboron borohydrobe, and the indicator is adjusted to bromol blue, and the content of the quaternary ammonium salt surfactant can also be measured, and the blue disappears in the system organic phase disappears the end point. Textiles should be in contact with various dyes and additives during processing. These additives, especially detergents, penetrants, emulsifiers, uniform dyes, etc., are easily produced by foam after mechanical vibration. The foam is a dispersion of air in water or in certain liquids. During the fabric processing, the contact surface of the liquid and the fabric is reduced, resulting in uneven processing, seriously affecting the quality of production and product. To eliminate foam, you can take static, heated or decompression, but during printing and dyeing, in order to quickly eliminate foam or avoid foam, a textile printing and dyeing foaming agent must be added. After adding a defoamer in the working fluid, it will become a solution. The emulsion or dispersion is adsorbed in the surface of the bubble film. Since its surface tension is lower than the bubble film, the surface active agent or foamed substance can be sufficient, and the surface viscosity of the foam film is reduced, and the local thinning is broken. 46. ​​Surfactants are pulverized or pulverized, and simply physically mixed with the powder. This operation is carried out in a high-speed kneading machine with jacket, is simple and convenient, and it can be packaged directly after discharge. The effect is very poor. 2. Use a suitable inert solvent (or water), first dissolve or disperse the surfactant, then mixed with powder, thoroughly mixed, then evaporating the solvent. The processed surfactant and the powder are not simple mechanical mixing, but the surfactant is tightly wrapped in the surface of the powder particles. In general, the effect is better. 2 wet surface treatment method, mainly suitable for surface treatment of calcium carbonate particles produced by carbonization method. It is divided into two operations: a surfactant is added to the surfactant before carbonization. 1 minute two methods, each 2 points, 1 point. Test paper 31. Fill in the blanks (1 point per empty, a total of 33 points) 3.

News you might interested in