Location:HOME - NEWS

How to understand the surfactants in the ingredient list
Feel free to email to spk@nbinno.com or contact 86-574-27912196 for samples and quotations
That is, the oil-contaminated color) adheres to the fabric surface very brightly, and it penetrates into the fabric when touched by hand. The foam is thinned for a long time, and organic polymer compounds such as silicone oil are extended to all sides. The surfactant foam ether defoamer uses alcohol to remove dirt traces and dirt binding, resulting in irregularities. until the bubble burst. Therefore, without making several cylinders, I found that when using defoamer, many printing and dyeing companies destroyed the directional molecular adsorption layer color blocks formed on the gas-liquid surface (interface) during the operation. The surface of the fabric is stained with oil in irregular shapes. Because this oil (what color is dyed is not clear, especially where the oil comes from, the oil of this phenomenon sticks to the fabric. Therefore, while eliminating foam, it also brings many unfavorable factors and negative effects, and even causes Economic losses. Commonly used transdermal absorption enhancers are: dimethyl sulfoxide and its homologues (for promoting the transdermal absorption of salicylic acid); alcohol compounds (propylene glycol); surfactants, etc. Incorporating this ingredient in your skin care products is designed to do more with less. In shampoo ingredients, water content is undoubtedly the first. Besides water, surfactants are the workhorses of ingredients. Today, Yuzu Mom teaches you how to understand surfactants in the ingredient list. The previous studies on the modification of coal surfactants mainly used surfactants to change the wettability of coal, and were used in coal flotation and dust removal. However, there are few studies on the physical and mechanical properties of surfactant-modified coal in coal mining. The researchers mixed the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) with graphene oxide under ultrasonic waves, and then reduced it with hydrazine hydrate to obtain modified graphene. The modified graphene can be stably dispersed in water, and the composite electrode material can be further modified. Water-based paint is a water-dispersed medium, and water is the continuous phase.octadecanoic acid-2-hydroxyethyl ester factory Glycol Stearate Monoester manufacturer  However, the surface tension of water is higher at 72.8mn/m. The study found that the surface tension of the water phase in the water-based paint must be around 30mn/m to make the pigment easier to wet.2-Hydroxyethyl octadecanoate supplier  This determines that surfactants such as wetting and dispersing agents must be added to latex paints [1]. Emulsifiers that must be used in the production of emulsions are also surfactants; in addition, coatings are prone to bubbles during production and storage. Pigment particle flocculation, coarsening, precipitation, thickening, skinning and other undesirable phenomena, most of the anti-settling agents, anti-skinning agents, and defoaming agents used to solve these problems also belong to surfactants. Surfactants are so widely and frequently used in waterborne coatings that it is difficult for waterborne coatings to get rid of surfactants, so this solution is not feasible. Different textile processes add different additives. Textile additives are mainly divided into surfactants and polymers. In textiles, surfactants tend to cause foaming problems, so defoamers are added to control foaming throughout the textile printing and dyeing process. The main ingredient in this shampoo is lauryl sulfate, along with some co-surfactants (such as coconut oil amidopropyl betaine) to better remove oil from the scalp and keep your hair from drying out. 1. At present, it is a common method to clean the surface dirt of terrazzo, marble and other stone floors. There are two types of surfactants: ionic and nonionic. Their molecules contain polar and non-polar genes. The principle of cleaning is to use surfactants to reduce the interfacial tension, wetting, adsorption, emulsification, dissolution, stone carving arch, dispersion and other properties, so that the dirt molecules fall off and disperse, so as to achieve the cleaning effect. It is also an amino acid and soap-based facial cleanser, mainly adding two amino acid surfactants and three soap-based ingredients, because the ingredient list is arranged from more to less, obviously more surfactants. Pregnant women can also use it.
News you might interested in
Product list
Silanes
Surfactants
Fungicides
Retardants
Photoinitiators
Light stabilizers
Catalysts
Others
Contact us

INNO SPECIALTY CHEMICALS

Address:163 RUIQING ROAD.,NINGBO 315000 CHINA

Tel:86-574-27912196

Email:spk@nbinno.com

Website:https://www.innospk.com

Copyright © 2017 All Rights Reserved INNO SPECIALTY CHEMICALS

Tel/span>
Contact
EN English