The water has a high surface tension and cannot be well wetted. This is why water is used in conjunction with a wetting agent or surfactant to make it an effective cleaning agent. The wetting agent reduces the surface tension of the water to spread to the entire surface and slide to dirt. Water and surfactants together, pull the dirt from the surface of the part.
First, the starting process of the fatigue crack of stainless steel anti-collision guard is related to environmental adsorption, that is, it is independent of general corrosion of the metal surface, which is related to the surfactant.
Dimethyl Didecyl Ammonium Chloride factory Cracks occur due to the adsorption and circulating load of the surfactant. Professionals believe that the corrosion fatigue process of stainless steel anti-collision guards is generally divided into two steps, as shown below:
Therefore, the development of active agents and other additives should meet environmental protection and energy saving requirements. Its development trend can be summarized as the following: Surfactants should be efficient. In addition to cleaning, there should be functions such as antibacterial, sterilization, moisturizing skin, and should continue to develop new surfactants.
Surfactants are important components of home Qing products, 96% -99% from the plant-based surfactant, the fatty alcohol of the surfactant from coconut oil. Palm oil, etc.
There are many ways to eat fruits and vegetables, and it is also one of the many methods of making fruits and vegetables.
Didecyldimethylammonium chloride supplier When making fruits and vegetable juices, the surface will float a layer of foam. The main components of these foams are saponins and other surfactants in plants.
The foam agents added to the foam type are typically surfactants, with strong permeability, which can quickly penetrate into pores. Tie. The foam can limit volatile losses such as volatile substances such as ethanol, so that the foam has long contact the skin surface. The contact area is large.
Amino acid washing milk is selected from the group consisting of amino acids.
N,N-Didecyl-N,N-dimethylammonium Chloride manufacturer Cocoatoxyl hydroxyethyl sodium acid. Glucose series. Astrikase series of surface active, washing milk, such as a glucose type. The beet base is made of natural ingredients, relatively mild, but generally not used alone, will be combined with other surfactants.
1. Surfactant is easy to foam: a variety of surfactants, especially emulsifiers, wetting dispersants, grasmers, thickeners, etc., and various additives are used, and various additives are used.
Water-based water is an important detergent and has any other cleaner that cannot be replaced. Ordinary water is easy to obtain from nature, water has strong solubility and dispersion. However, the surface tension of water is large, and the surfactant is required to reduce surface tension and increase surface humidity. In general industrial cleaning, acid, alkali and water are more common, and part of metal cleaning should be added to the precision agent; in precision and super precision industrial cleaning.
Amino acid surfactants are a new type of green environmentally-friendly surfactant for renewable substances, an upgrade product of conventional surfactants. The amino acid surfactant not only has a wide range of biomass raw materials, but the poisonous side effects are small, the performance is mild, small irritability, good biodegradation, green production process, but also has good emulsification. Moist. Dissolve. dispersion. Foam performance.