Surface modifiers commonly used in silica graystones mainly include coupling agents such as silane, aluminate, titanate, stearic acid, unsaturated fatty acids, and organic oligomers, or mixed with two or more surfactants.
Asphalt emulsifier NOT factory Emulsifier 1831 manufacturer
For allergic skin, it is recommended to use an amino acid to cleanser. Excessive frozen milk often contains more anionic surfactants, large alkaline, high pH, large irritability, and should not choose.
Industrial cleaner market and industrial cleaning equipment are an important part of my country's industrial economy. Industrial cleaner is widely used, from the plane to bicycle, then from electronic components to drilling equipment. Since the surfactant content in the detergent is high, a foam often occurs, and therefore people choose industrial detergent to eliminate foams. However, there are many detergents.
Asphalt emulsifier supplier When choosing an industrial detergent, you should polish your eyes.
Surfactants are an important part of cleaning products. Three surfactants that are often encountered in the washing product are: anionic surfactants, zwitterionic surfactants, and nonionic surfactants.
Double amino acid formulation balances water oil, coconut acid glycinate, amino acid surfactant, ensures gentle, rich in dense foam, deep cleaning, fine foam deep into pores, removal of oil moisturizing; laurel sodium, surfactant foam performance Ok, clean, rich in foam, stable, gentle bactericidal.
The foam in the washing sash is from the alkaline surfactant. Rich foam indicates that the content of alkaline surfactant is high, the higher the cleaning ability, the stronger the destructive power of the skin surface protective layer. The choice of facial cleanser does not necessarily depend on the number of foams.
Surfactant is mainly used as an oil removal, using low surface tension, good permeability, strong emulsification, etc., referred to as a surfactant removal method.
By scanning the electron microscope, you can clearly distinguish between active calcium and non-active calcium products. 5. The oil absorption value of different active calcium products reduces the gap rate between the particles, and the microscopic surface of the particles becomes smooth. Therefore, when the oil absorption value of the product is detected, the active calcium product is lower than the non-active calcium product. 6. The organic active agent content of different active calcium products is generally, so the calcium carbonate content is less than 1% to 5% of the non-active product. The smaller the active calcium product (such as the calcium carbonate) particle size, the higher the surfactant content. Since the surfactant of the active calcium product reduces the surface of the particles, the lower the calcium carbonate content.
Some surfactants are added to some process tank solutions, and the essence of contaminants such as acid mist is added to the surface of the surfactant, or a layer of plastic hollow ball is added to the surface of the solution to prevent escape of the acid.
Metal surface cleaning generally requires low foam or no bubble. Water fundamental cleaner is generally made of surfactants and additives. Surfactants are prone to produce a large amount of foam under mechanical action such as cleaning and stirring. The foam will not only increase the difficulty of cleaning, but also cause cleaning residue, oil spots, etc.
Location：