From the perspective of formulation components, the surfactant used is a surfactant of amino acid type, in the recording table, the amino acid surfactant is at the forefront. The formula does not contain spices to keep the formula. In general, the spices and preservatives in cosmetics will stimulate face allergies. For convenience, the product is equipped with a soft silicone brush head with good biocompatibility. The retail price of products is only 49 yuan.Dodecyl Trimethyl Ammonium Chloride factory  Compared with hundreds of amino acids in the market, this is a conscience product. However, surfactants will destroy the original structure of the skin, damaging the skin barrier, and carcinogenic. The absorption of carcinogen diethanolamine in the skin is much larger than eating in the stomach. Since the moisturizer is applied to the skin, it is not washed away for a long time, and the action of surfactants to the skin is longer than the washing milk. A moisturizing product containing a surfactant will increase the risk of skin during moisturizing. The active agent of the detergent surface reduces the surface tension of the water to form a water film. When we blow, there are many small holes on the wipes, and the water film forms bubbles through the small holes of wipes. In general, the higher the temperature. The better the degreasing effect. High temperature reducing the viscosity of the oil, accelerates the penetration of chemical reactions such as saponification and surfactants. Emulsification and dispersion. However, not all occasions are, the higher the temperature, the better, and the various degreaseants have a suitable temperature range, and the excessive temperature will make some surfactant precipitation in some degreased, attached to the surface of the cleaning, resulting in phosphating The film is uneven. The nonionic surfactant (especially polyethylene glycol) is contrary to the ionic surfactant, and it is easy to mix with water at low temperatures, and the solution is heated, and a certain temperature is reached, and the surfactant will precipitate. The transparent solution suddenly became turbid, this precipitate. The stratified and clouded temperature points are called a cloudpoint of the surfactant. This process is reversible. When the temperature reaches the turbidity point, the emulsion forms, the transparent solution appears again when cooling. The turbidity point is the characteristic constant of nonionic surfactants. 2. Surfactants of other additives used in the coating are not compatible with the function of the defoamer. In particular, emulsifiers, wetting dispersants, graft, thickeners, and the like can affect the effect of the defoaming agent. Therefore, when using various additives, you must pay attention to the relationship between different additives and choose the best balance point. The physical principle of oil dissolved makeup, adding a small amount of water into a milky white emulsion, which is an emulsification process. During the emulsification process, the surfactant begins to dissolve, the oil is wrapped, and finally rinsing with water, and cleaning the oil together with the surfactant. Painted milk: the pH of the washing milk is alkaline, the girl in the oily skin. The oil phase in the washing is clean. Water phase.Dodecyl trimethyl ammonium chloride supplier  Some advantageous surfactants. Emulsion products consisting of nutrients and other ingredients. According to the similar compatibility principle, when cleaning, the oil-soluble soil of the face surface is dissolved with the oil phase, and water soluble sweat and dirt are dissolved with the surface of the surface.Surfactant 123 manufacturer  Soap is also a surfactant - it can reduce the surface tension of water. Water has a strong surface tension, resulting in water droplets to form beads from various surfaces from the metal to the fabric. This will slow the wet process of water and inhibit its cleanliness. Because soap will reduce the surface tension of water, it is more likely to spread and moist. In addition, the surfactant will loose and emulsify dirt and debris, dispersed in water and washed away. The water-based metal cleaning agent is a cleaning agent having a surfactant as a solvent, water is a solvent, a metal hard surface is a cleaning object. It can replace gasoline. The kerosene is mainly used for mechanical manufacturing and maintenance. Maintenance and maintenance of mechanical equipment. Sometimes it can also be used as a petrochemical equipment. The water-based cleaner is mainly composed of a nonionic surfactant and anionic surfactant composite, plus a mixture of various auxiliary additives. The former has a large decontamination ability and has good rust resistance. Corrosion inhibition performance, the latter can improve and improve the comprehensive performance of the cleaning agent.

News you might interested in